In step toward solar fuels, durable artificial photosynthesis setup chains two carbons together

September 17, 2024
Contact:

The system produces ethylene, an important ingredient of many plastics, with much higher efficiency, yield and longevity than competing systems

In the background, Pan shines a light into the device. In the foreground are multiple portholes and tubes in silvery metal.
The experimental setup in Zetian Mi’s lab where his team prepared an artificial photosynthesis device that can turn carbon dioxide and water into ethylene, in a step toward making solar fuels. Yuyang Pan shines a light on the device. Image credit: Sylvia Cardarelli and Jero Lopera, Electrical and Computer Engineering, University of Michigan

A key step toward reusing CO2 to make sustainable fuels is chaining carbon atoms together, and an artificial photosynthesis system developed at the University of Michigan can bind two of them into hydrocarbons with field-leading performance.

The system produces ethylene with efficiency, yield and longevity well above other artificial photosynthesis systems. Ethylene is a hydrocarbon typically used in plastics, so one direct application of the system would be to harvest carbon dioxide that would otherwise be vented into the atmosphere for making plastics.

Zetian Mi
Zetian Mi

“The performance, or the activity and stability, is about five to six times better than what is typically reported for solar energy or light-driven carbon dioxide reduction to ethylene,” said Zetian Mi, professor of electrical and computer engineering at the University of Michigan and corresponding author of the study in Nature Synthesis.

“Ethylene is actually the most produced organic compound in the world. But it is typically produced with oil and gas, under high temperatures and pressures, all of which emits CO2.”

Pan and Bingxing stand in a lab. Two devices in the background are full of portholes, pipes and wires.
Yuyang Pan (left), a graduate student, and Bingxing Zhang (right), an assistant research scientist, in Zetian Mi’s lab where they prepared an artificial photosynthesis device that can turn carbon dioxide and water into ethylene, in a step toward making solar fuels. Image credit: Sylvia Cardarelli and Jero Lopera, Electrical and Computer Engineering, University of Michigan

The long-term goal is to string longer chains of carbon and hydrogen atoms together to produce liquid fuels that can be easily transported. Part of the challenge is removing all of the oxygen from the CO2 as the carbon source and water, H2O, as the hydrogen source.

The device absorbs light through two kinds of semiconductors: a forest of gallium nitride nanowires, each just 50 nanometers (a few hundred atoms) wide, and the silicon base on which they were grown. The reaction transforming water and carbon dioxide into ethylene takes place on copper clusters, each with about 30 atoms, that dot the nanowires.

The nanowires are submerged in water enriched with carbon dioxide and exposed to light equivalent to the sun at noon. The energy from the light frees up electrons that split the water near the surface of the gallium nitride nanowires. This creates hydrogen to feed into the ethylene reaction but also oxygen that the gallium nitride absorbs to become gallium nitride oxide.

The copper is good at hanging onto the hydrogen and grabbing onto the carbon of the carbon dioxide, turning it into carbon monoxide. With the hydrogen in the mix and an injection of energy from the light, the team believes two carbon monoxide molecules bond together with the hydrogen. The reaction is believed to be completed at the interface between the copper and the gallium nitride oxide, where the two oxygen atoms are stripped off and replaced with three hydrogen atoms from splitting water.

Two scientists in white lab coats and purple gloves at a machine with many portholes, some equipped with long metal tubes.
Bingxing Zhang (left) and Yuyang Pan (right) grow gallium nitride nanowires on silicon in Zetian Mi’s lab. The team’s artificial photosynthesis device can turn carbon dioxide and water into ethylene, in a step toward making solar fuels. Image credit: Sylvia Cardarelli and Jero Lopera, Electrical and Computer Engineering, University of Michigan

The team found that 61% of the free electrons that the semiconductors generated with the light contributed to the reaction to produce ethylene. While a different catalyst based on silver and copper achieved a similar efficiency of roughly 50%, it needed to run in a carbon-based fluid, and it could function for only a few hours before it degraded. In contrast, the Michigan team’s device ran for 116 hours without slowing down, and the team has run similar devices for 3,000 hours.

This is in part because of the synergistic relationship between the gallium nitride and the water splitting process: The addition of oxygen improves the catalyst and enables a self-healing process. The limits of the device’s longevity will be explored in future work.

Finally, the device produced ethylene at a rate more than four times higher than the nearest competing systems.

Pan shines a light into one of the portholes of the machine. In the foreground, we look down one of the silvery tubes with blue-white light reflecting on the inner wall.
Yuyang Pan, a PhD student in electrical and computer engineering and coauthor of the study in Nature Synthesis, checks on the machine growing gallium nitride nanowires on silicon in the lab of Zetian Mi. The device that the team can turn carbon dioxide and water into ethylene, in a step toward making solar fuels. Image credit: Sylvia Cardarelli and Jero Lopera, Electrical and Computer Engineering, University of Michigan

“In the future, we want to produce some other multicarbon compounds such as propanol with three carbons or liquid products,” said Bingxing Zhang, U-M assistant research scientist in electrical and computer engineering and first author of the paper.

Liquid fuels, which could enable many existing transportation technologies to become sustainable, are Mi’s ultimate goal.

This study was supported by the U.S. Army Research Office.

The device was built in the Lurie Nanofabrication Facility and studied at the Michigan Center for Materials Characterization.

The team has applied for patent protection with the assistance of U-M Innovation Partnerships and is in the process of licensing the technology to NX Fuels, a U-M startup cofounded by Mi. Mi and the University of Michigan have a financial interest in NX Fuels.